Mr76 Maant27 edu.svet.gob.gt

Mr76 Antennas. Buy Cisco Meraki MR76HW Cloud Management Wireless Access Point For example, if an MR76 has two ANT-25 patch antennas properly connected, even though they are dual band antennas, one ANT-25 will have both pigtail cables connected to the 2.4GHz radio and the other ANT-25 will be connected to the two 5GHz radio ports." The4 antenna ports are connected to2.4 GHz and 5GHz client serving radios respectively

MR76 Installation Guide Cisco Meraki
MR76 Installation Guide Cisco Meraki from documentation.meraki.com

N-Type antenna attachment ports (4x) 2x N-Type antenna ports are located at the top of the MR76 and 2x are located at the bottom of the MR76 The4 antenna ports are connected to2.4 GHz and 5GHz client serving radios respectively

MR76 Installation Guide Cisco Meraki

The Meraki MR76 is a Wi-Fi 6 (802.11ax) 2x2 cloud managed outdoor access point for industrial environments For example, if an MR76 has two ANT-25 patch antennas properly connected, even though they are dual band antennas, one ANT-25 will have both pigtail cables connected to the 2.4GHz radio and the other ANT-25 will be connected to the two 5GHz radio ports." Hey @BrandonS, the difference between the two is that the MA-ANT-27 (Sector Antenna) is a more focussed beam.It doesn't spread as wide an consequently has a higher gain in the direction it's facing - so should provide greater coverage directly away from the antenna, but won't spread to the sides as much.

Cisco Meraki MR76HW Wireless DualBand Access Point with Antennas. Antenna type: omni-directional; Frequency range: (2 GHz): 2.400 - 2.500 GHz; (5 GHz): 5.150 - 5.875 GHz Just to be clear; with MR76 you could use different antenna types, to provide different coverage areas for 2.4 GHz and 5 GHz, because each radio has its own pair of antenna posts

Cisco Meraki MR76HW Wireless DualBand Access Point with Antennas. That is a fairly unusual requirement though - but I have seen it, occasionally with (say) wireless mesh; directional antenna on one radio (2 posts), in one band, for the backhaul, with (say) ANT-20s for local clients. N-Type antenna attachment ports (4x) 2x N-Type antenna ports are located at the top of the MR76and 2x are located at the bottom of the MR76